100W Reptile Heat Bulb &Clamp Light 8″ Reflector &Digital Thermostat Controller

Sold on eBay


Product description
Infrared Ceramic Reptile Heat Bulb:
Specifications: Socket: E26 Volt: AC 110-120V Watts: 100W Material: Ceramic, NiCrAl Diameter of heating surface: 85 mm
Note: 1. Lamp surface temperature is too high, do not directly touch during it works. 2. Before remove it from fixture, please allow at least 1 hour for cool to avoid scald. 3. Accidents may happen due to improper operation so please use it in a right way and avoid using in damp environment. 4. Please adjust the distance between the lamp and the pets, at least 35cm. 5. Please away from combustible or explosive materials. ;
Digital Thermostat Controller:
Specifications: Temperature control range: 40-108°F Temperature display range: 32-140°F Rated Voltage: AC 120V 60Hz Max Loading: 8A 1000W
Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug The cord of the temperature probe and grounded three-prong plug is 6 feet ETL certification is proof that a product complies with widely-accepted safety standards Digital thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature.
Abnormal Warning:
1. If thermostat shows “E1”, it means that the actual temperature is lower than 0 degree Celsius or 32. 0 degrees Fahrenheit.
2. If thermostat shows “E2”, it means that the actual temperature is higher than 60. 0 degrees Celsius or 108. 0 degrees Fahrenheit.
3. If thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor.
Clamp Light:
Specification:Volt: 120V Watt: Accepts up to 100W bulb (E26) Reflector Diameter: 8. 5 inch Cord: 6 Feet 18/2 SPT-2 Cord UL Listed
Clamp light can also be used as a table lamp in your room, garages or art studios, a work light in photography and workshops, amphibians and reptiles pets terrarium heat lamp, and even a growth light for indoor plants. Warning: The power cord on this product contains chemicals, including lead known to the State of California to cause cancer. Wash hands after use.
  • Multifunction: great for reptile and amphibian terrariums, incubating poultry heater, can increases blood circulation promoting health and healing.
  • Perfect 24 hour heat source: heat bulb does not emit any visually detectable light, wouldn’t disturb pets sleep. 110-120V, 100W, E26 lamp base. Material: Ceramic, metal, nicral. To avoid scald, Please wait at least 1 hour to cool down after turn off the bulb
  • Multifunctional clamp light: scratch-resistant sleeves covered clamp wouldn’t leave marks on your surfaces, adjustable ball joint and 8. 5 inch aluminum reflector can focus light where you need. Volt: 120V, Watt: 100W (E26). have convenient on/off button
  • Temperature range: digital thermostat provides temperature control between 40-108°f (5-42°c), temperature display Range: 32-140°f. Can choice Celsius or Fahrenheit readout. Volt: 120V 60Hz, Max Loading: 8A 1000W. Do not immerse controller or probe into water
Package Include:(According to choice
1-Pack 100W ceramic heat bulb,
1-Pack digital thermostat (easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug),
1-Pack clamp light with 8. 5 inch reflector.
All products 1 year Manufacturer