Exo Terra Thermoelectric Reptile Egg Incubator

Sold on eBay


Description

Exo Terra Thermoelectric Reptile Egg Incubator
  The incubator has a transparent door and interior lighting to easily monitor 
the incubation and hatching process. Unlike conventional incubators, the 
Exo Terra Incubator automatically starts cooling when the temperature exceeds 
the set incubation temperature and automatically switches back to heating 
mode when the temperature drops below the set incubation temperature.

This cooling and heating combination is extremely useful in rapidly 
changing environments and during hot summers. The Exo Terra Incubator 
prevents egg loss due to overheating by automatically switching into 
cooling mode until the set incubation temperature is reached. Humidity 
is provided by adding water to the slide-out tray in the bottom of 
the unit or by adding an extra (optional) container with water.
Key Features :
•Digital Temperature Control
•Double slide-out shelves
•Accurate cooling and heating combination
•Prevents egg loss
•2 incubation containers included 

Inside diameter : height 12.5 inch x width 10 inch x right side 7.5 inch deep / left side 8.5 deep ,
 look at front picture of shelf , to help with figuring size
Container size : width 4 inch x length 6.25 inch x deep 2 inch
 
All Incubators are open and checked for damages and to make sure temperature operates up to
90 degrees. When you receive please run unit for a day or two to get the temperature inside to be 
what’s needed . I suggest having a thermometer inside so you can double check the temps. The 
units can be off by 1-3 degrees so learning your unit and learning how to set the temp so inside 
is operating at your desired temp. can take a day or two . I have found using an extra exo terra 
thermometer inside is a good way to know the temp. Remember never open the door once set , 
or you will cause temp to fluctuate.
Use light and viewing window. Also shut light out at all times (only for viewing) . 
it is not working message or text countryfishgirl right away. If unit is handled roughly by carrier (dropped) 
Heating unit may break , unit is very delicate. So should be returned as soon as possible , if you think there’s 
a problem. Units can be off by 1-4 degrees. So take your time getting  an thermometer inside set to where 
you can see. Than watch till you know the machine.  write a log book with time and temp so you can learn 
the machine.
  Also  I have found while operating my own units  in room temperatures 70-74 . The incubator can hold 84 to 86 
degrees easy . You will see at times the heater click on an off many times and than run longer or shut off for 
five minutes. Don’t open the door , leave unit run . Do not let this bother you. These unit run constantly two 
different fans.    First , fill some water into bottom tray to make humidity no matter what. Second , run unit 
at 82 degrees after one hour check temp. You may see temp is 80  . I let run for a couple days and check internal 
temp every couple hours and adjust outer temp controls till my inner temp is where I need , than I look at outer 
digital reading and now I know if temp is off and how to raise if needed. Also I have found not to run unit in a 
colder room . Machine works great in room climate 70 and above. when room is cooler the fans run more and 
unit heater is off by 3 to 4 degrees . Also keep light turned off ,use for viewing .

Questions , message me . I will get to you and answer your questions for a good setup. Also you can contact Hagen customer service for questions. 
Remember try not to wait till last minute to set up that perfect environment . Take your time and be ready , Days ahead of time.
SHIPPING: Unit is in box and is bubble wrapped and put in large box for safe DELIVERY.
Please if any problems message countryfishgirl before doing any thing else . We will always take care of you.

Additional information

modified item

pet type

brand

model

custom bundle

mpn